Integra Wheel Bearing Replacement – ’94-01

by NinjaX on June 17, 2010

Wheel bearing replacement applies to Acura Integra models between 1994-2001.

Removal

  1. Remove steering knuckle. Using Front Hub Remover/Installer (07GAF-SE00100), Hub Remover/Installer Base (07GAF-SD40700) and hydraulic press, remove hub from steering knuckle. Remove splash guard screws and splash guard. Remove bearing retaining snap ring and knuckle ring from knuckle.

  2. Using bearing driver and Attachment (07746-0010500), base and hydraulic press, remove bearing from knuckle. Using commercially available bearing separator, remove inner bearing race from hub. Clean knuckle and hub thoroughly before reassembly.

Installation
Using press and old bearing, install NEW bearing into knuckle. Install snap ring into knuckle groove. Install bearing retaining snap ring splash guard. Invert knuckle. Press new bearing into hub. Press hub into knuckle. To complete installation, reverse removal procedure. Check alignment.

Got questions and comments on our wheel bearing removal and installation for Acura Integra 1994-2001? Let us know!

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay

Tagged as: acura integra 1994-2001, dc2, wheel bearings

Leave a Comment