Adjusting the clutch pedal height applies to all Acura Integra models between 1994-2001.
- Loosen lock nut “A”. Loosen clutch switch until plunger no longer touches clutch pedal. Loosen lock nut “C”. Rotate clutch pedal push rod to obtain specified pedal travel and height. Tighten lock nut “C”.
- Turn clutch switch inward until it contacts clutch pedal, then turn it in another 1/4 – 1/2 turn (3/4 – 1 full turn on Integra). Tighten lock nut “A”.
- Loosen lock nut “B”. Loosen clutch interlock switch. Measure clearance between floorboard and clutch pedal with clutch pedal fully depressed. Release clutch pedal .59-.79″ (15-20 mm) from fully depressed position and hold it there.
- Adjust position of clutch interlock switch so engine will start with clutch pedal at this position. Turn clutch interlock switch inward an additional 3/4 – 1 turn. Tighten lock nut “B”.
Got questions and comments on our clutch pedal height adjustment for Acura Integra 1994-2001? Leave them below!
